Where to Find Compression Springs

Compression Springs | KB DeltaWhere Can You Find Compression Springs?

 

Everyone has heard the expression that someone has a spring in their step, indicating that they are lively and ready to take on whatever life has in store for them. If the springs in your devices need improved  vitality or replacements, it is a good idea to do it sooner rather than later, because springs can lie at the foundation of production efficiency. Do not let your business suffer from a lack of output and falling profits before you realize the problem begins with your compression springs. Have your machinery serviced, your springs checked and find out whether they can be repaired or need to be replaced. All springs need to be replaced now and again, so be aware of how old they are and select the best quality compression springs you can find to ensure an effective operation and production.

 

Where to Look

 

Almost anything can be ordered online nowadays, and that applies to compression springs. Before purchasing your springs online, you should do a significant amount of research to find the best quality products that suit your devices and machinery. It might be a good idea to purchase the same brands you did before from the same company, but if you want an improvement on what you had before, do some research online and ask around. Browse through selections online or order old-fashioned catalogs to get an idea of what kind of springs are offered. You may want to visit the companies, discuss what kind of springs you need with an expert and see firsthand how effective their products are.

 

What to Look For

 

Springs are deceptively simple objects that could probably be made by a child with a bit of imagination and some sturdy wire. However, the right compression springs for your business are hardly child’s play but require advanced technology and superior design to achieve the effects you want. You need the right size, shape, and materials for your many jobs. The list of materials is endless and may include stainless steel music wire, beryllium copper, and phosphor bronze. You may be looking for springs that have the width of a millimeter or are over a hundred inches wide. Think about what kinds of functions and operations your springs are needed for and look for those that can stand up to heat, pressure, and constant motion. Look for a company with experience in making springs and uses state-of-the-art technology. Some companies simulate the performance of their products so that you can see their springs in action. Custom-made springs are put through a battery of tests to measure pressure, fatigue and temperature resistance. Also, work with the spring manufacturer that provides a warranty.

 

Do You Need a New Valve?

 

When troubleshooting the compression springs that you already have, check to see if the problems with your compression springs might lie in the valves. If you your springs work well one minute and the next they suddenly stop, check the valve first, since the valve is to blame for most compressor springs shutdowns.  When looking for replacements, you can keep your valve healthy by selecting springs made of music wire which is more pliable than many other materials and can handle repetitive pressure without damaging the valves. Music wire gets its name from the fact that it is the variety of wire used for piano strings. Just as a piano takes many hits from someone playing for hours, the wire used from your spring can handle repeated pressure without breaking down. When purchasing the springs, look for materials that are resistant to corrosion and extreme temperatures. You can make the wire stronger with several processes including magnetizing, plating and painting.

 

Qualities of Compression Springs

 

Compression springs are open-coil and are generally put on a rod or a wire. When you push it down, it generally goes back to its original shape and provides resistance against force. The springs are often straight and have a consistent diameter. Others can be hourglass or convex shapes. The compression springs should provide grounding stability and tolerance to heavy loads and pressure. These types of springs are often found in automobiles electronics medical supplies and all sorts of devices. When selecting the springs look for various factors including size, shape, material, spring rate, stiffness, and height.

 

The Advantage of Custom Springs

 

You can order a large number of ready-made compression springs or opt for custom designs if you require springs that are not readily available from most companies. Even if you can not find ready-made springs that fit your requirement, there are certain advantages to getting custom-made springs. If you require springs that are unusual shapes and are made out of different kinds of materials, look for a company that specializes in custom springs. One advantage of custom-made items is that you are taken through every part of the process from the design to simulation and finally testing. These springs cost more, but there is a large amount of care and attention that goes into producing them and therefore they are higher-quality and last longer.

 

Spring Shopping

 

You should do a certain amount of comparison shopping if you are looking for springs for the first time or it is been a while since you purchased them. However, if you are happy with a certain company, it is worthwhile staying with a trusted spring supplier. If you are a loyal customer, you are likely to receive special care and attention and perhaps discounts. In many cases, the more springs you order the less you have to pay per spring so it is worthwhile having all of your springs replaced if it is been a while since you have done so. Do some troubleshooting for your springs and inspect them to make sure that they are working properly. It is worthwhile to replace springs before they show signs of wear and tear to avoid interruption in your production. Invest in your springs and you will enjoy the efficient production and long-lasting machinery that will tackle any job you need to be done.

  • Metallic Plates

    KB Delta manufactures and stocks a complete range of metallic compressor valve plates and rings for the natural gas, refrigeration and P.E.T. industries.

  • Thermoplastic Plates

    Our specialized precision tooling and proprietary lapping process gives our customers the highest quality thermoplastic plates and rings in the industry.

  • Springs

    We manufacture our own springs and stock over 2 million springs for a variety of OEM spring styles, forms and materials.

  • Peripheral Valve Internals

    KB Delta offers one of the most complete lines of valve internals in the industry. All of our parts are manufactured to OEM Standards in performance and efficiency.

  • Complete Valve Repair Kits

    KB Delta offers a full line of valve repair kits for all the major reciprocating compressor manufacturers.

  • P.E.T. Compressor Parts

    KB Delta specializes in manufacturing compressor valve parts for high pressure air compressors used in the P.E.T. plastic bottle manufacturing industry.

Industries we serve

Natural Gas Industry

The processing and refining of Natural Gas into a marketable products, by separating gas into pipeline-quality natural gas and a stream of mixed natural gas liquids and the transportation of natural gas to through a series of reciprocating compressor stations and pipes, and from there to end users.

Blow Molding Industry

This industry manufactures blow molding machinery. Injection stretch blow molding process has two main different methods, a single-stage and two-stage process; these are the methods by which hollow plastic parts are formed.

Medical Technology Industry

The medical technology industry is an important part of the healthcare sector. It includes most medical devices which aid the prevention, diagnosis and treatment of diseases and illnesses. Established centers of this industry include the United States and Western Europe.