
Valve Seat Failure? Here Are Preventative Maintenance Tips
As industrial equipment that is critical to various manufacturing processes, compressors are expected to operate continuously for long periods of time without any major issues. However, even the most reliable compressors can experience problems, and one of the most common issues is valve seat failure. This common issue can lead to decreased efficiency, costly repairs, and even equipment downtime.
In this article, we will discuss what valve seat failure is, why it occurs, and provide preventative maintenance tips to help you avoid this problem.
Understanding Valve Seat Failure
Valve seat failure occurs when the valve seat, which is the surface in the cylinder head where the valve comes to rest, becomes worn or damaged. This can lead to a number of issues, including poor compression, decreased efficiency, and in some cases, complete compressor failure. Valve seat failure is usually caused by excessive heat or pressure, poor lubrication, or a lack of maintenance.
Causes of Valve Seat Failure
The causes can vary depending on the type of compressor, the operating conditions, and other factors. Here are some of the most common causes:
- High temperatures: Compressors generate a lot of heat during operation, which can cause the valve seat to expand and contract. If the temperature gets too high, the valve seat can become damaged or warped, leading to failure.
- High pressure: Compressors operate under high pressure, which can put a lot of stress on the valve seat. Over time, this stress can cause the valve seat to crack or break, leading to failure.
- Poor lubrication: The valve seat needs to be properly lubricated in order to function properly. If there is not enough lubrication, the valve seat can become worn or damaged, leading to failure.
- Lack of maintenance: Regular maintenance is essential for any compressor to function properly. If the compressor is not properly maintained, the valve seat and other components can become worn or damaged, leading to failure.
Preventative Maintenance Tips
Preventative maintenance is the best way to avoid valve seat issues and other compressor problems. Here are some tips to help you keep your compressor running smoothly:
- Monitor temperatures: Keep an eye on the temperature of your compressor and make sure it stays within the manufacturer’s recommended range. If the temperature gets too high, take steps to reduce it, such as increasing airflow or reducing the load on the compressor.
- Check for leaks: Leaks can put extra stress on the valve seat and other components, so it’s important to check for and fix any leaks as soon as possible.
- Use the right lubricant: Make sure you are using the correct type and amount of lubricant for your compressor. Consult the manufacturer’s recommendations or speak with a qualified technician if you are unsure.
- Replace worn parts: Regularly inspect your compressor for signs of wear and tear, and replace any worn or damaged parts before they can cause problems.
- Clean and maintain filters: Dirty filters can restrict airflow and cause the compressor to work harder than it needs to, which can put extra stress on the valve seat and other components. Make sure you clean or replace filters regularly to keep them functioning properly.
- Schedule regular maintenance: Regular maintenance is essential for keeping your compressor running smoothly. Consult the manufacturer’s recommendations for maintenance intervals, or speak with a qualified technician to develop a maintenance schedule that works for your specific compressor.
Prevention Steps
Valve seat failure can be a costly and time-consuming problem to fix, but it can be avoided with proper preventative maintenance. By monitoring temperatures, checking for leaks, using the right lubricant, replacing worn parts, maintaining filters, and scheduling regular maintenance, you can keep your compressor running smoothly and avoid valve seat failure.
Conclusion
Valve seat failure can be a frustrating and expensive problem for compressor owners. However, with the right preventative maintenance, it can be avoided. By monitoring temperatures, checking for leaks, using the right lubricant, replacing worn parts, maintaining filters, and scheduling regular maintenance, you can keep your compressor running smoothly and avoid costly repairs and downtime.
Remember, prevention is always better than cure, so take the time to develop a preventative maintenance plan for your compressor today.
CONTACT US TODAY
-
Metallic Plates
KB Delta manufactures and stocks a complete range of metallic compressor valve plates and rings for the natural gas, refrigeration and P.E.T. industries.
-
Thermoplastic Plates
Our specialized precision tooling and proprietary lapping process gives our customers the highest quality thermoplastic plates and rings in the industry.
-
Springs
We manufacture our own springs and stock over 2 million springs for a variety of OEM spring styles, forms and materials.
-
Peripheral Valve Internals
KB Delta offers one of the most complete lines of valve internals in the industry. All of our parts are manufactured to OEM Standards in performance and efficiency.
-
Complete Valve Repair Kits
KB Delta offers a full line of valve repair kits for all the major reciprocating compressor manufacturers.
-
P.E.T. Compressor Parts
KB Delta specializes in manufacturing compressor valve parts for high pressure air compressors used in the P.E.T. plastic bottle manufacturing industry.