Look for High-Quality Compressor Replacement Parts

Finding the best compressor replacement parts begins by searching for the best compressor manufacturing company. There are important factors to consider, which you can read below.

Look for High-Quality Compressor Replacement Parts - KB Delta

When you are looking for compressor replacement parts, you want to be sure that you obtain a high-quality product that exceeds expectations. When your equipment is important enough to put in the man hours needed to replace parts, you want parts that will stand up to the test of time and perform as well or better than the original parts.

 

Today’s Technology is There for You

Today’s technology allows for greater improvement in compressor replacement parts to provide for exact matches and to increase efficiency. Depending on your particular needs, parts have been optimized for gas flow, or fully balanced for crankshafts or bearings, for example.

Metallic rings and plates are precisely cut with laser cutting equipment that is state-of-the-art. If flatness is critical, then they are tweaked for maximum performance. If correct angles are necessary to improve performance, then the latest manufacturing processes will cut them to the exact degree needed.

Whether you are looking for metallic plates, springs, high-performance parts, or lantern rings, look for parts that will help provide the highest achievable performance for that part to keep your business machinery running smoothly. This will provide the energy necessary to keep your company at the top of its game. Downtime costs money. Look for compressor replacement parts from a company that you know you can trust and depend on when time is of the essence.

 

A Technician’s Toolkit

Knowing which spare parts to keep handy for a technician dealing with compressor repair can be a tricky decision. Many service personnel makes it a matter of policy to only order parts as needed. Others want to make sure, either by necessity or by design, to have a set of common repair parts in their toolkit. The reason being may be because:

 

  • They want to provide a higher level of service by eliminating the turn-around time of ordering parts.
  • They want to save the costs of a return visit between the time they diagnose the problem and the time the parts arrive.
  • Return visits may be prohibitive due to remote locations.

 

How to Choose Compressor Spare Parts to Stockpile

Technicians choose the parts they order in advance in several ways:

 

  • Low-cost parts to avoid the costs of inventory.
  • Parts that are the most common points of failure and are therefore the most likely to be used.
  • Choosing parts that will not become obsolete in the near future, to avoid having white elephants in the inventory.

 

Many technicians take advantage of their years of experience to determine which parts to keep handy. Certainly, these criteria justify keeping a supply of the most popular valve springs and a generous set of gaskets and seal materials.

 

Can a Technician Rely on JIT Parts Ordering?

In spite of the wisdom of keeping a few parts available for quick fixes, many technicians still operate on a just-in-time parts ordering system. Many of these work with clients that understand that compressors are advanced systems that do not come off the shelf from local home supply stores, and accept the delay in parts ordering as a matter of course.

This strategy can also work well with the efficient parts delivery systems of compressor spare parts suppliers that offer online ordering and one-day drop shipping to the site. Even remote-service technicians can often afford to stay on-site while the parts arrive. Advanced shipping from suppliers has made service calls more customer-centric than ever.

 

Finding a Reliable Manufacturing Company

When your compressor is in need of replacement parts, the task of finding a reliable manufacturing company presents itself. If you’ve never had to search for a compressor parts manufacturer before, you might be wondering how to find a company that will provide you with high-quality valve internals for a reasonable price. Read on for tips on what to look for in a great compressor parts manufacturing company.

 

Look for High-Quality Compressor Replacement Parts - KB Delta

 

Look for Respected Suppliers

You will want to look for a company with many years of experience in the repair work and engineering of the parts you need for your machinery. Some important points to look for are:

 

  • In-House Injection Molding – stress-free parts provide improved performance and better sealing.
  • Parts are 100% interchangeable – results in intended performance.
  • Use of highest quality components and materials – provides maximum durability and resistance where necessary.
  • Patented Technology – shows their goal of perfection and innovative ingenuity.

 

 

1. Years of Experience

A company which has many years of experience will be able to provide quality parts. If they’ve been in the business for a good amount of time, they’ve likely tested their products and developed process standards to ensure they are consistently providing the best parts possible. You can have more confidence in a seasoned manufacturer who has the years of experience needed to deliver properly working compressor parts and the knowledge needed to make professional suggestions to their clients.

 

2. Provides All Compressor Components

To make your life simpler, rather than getting parts from multiple companies, find a company that manufactures all necessary compressor components. Look for a company that manufacturers the following four major compressor components:

 

  • Coil springs
  • Metallic plates
  • Thermoplastic sealing elements
  • PTFE and thermoplastic buttons

 

The best companies are those which bring the manufacturing of all their products in-house. Performing this process in-house allows the company the ability to customize parts to fit the client’s needs.

 

3. Fast Response Rate

A fast turn-around time will make the difference between a good company and a great company. In addition to having a large selection of parts, the manufacturer that you select should be able to take raw materials through the manufacturing process, quality control, and shipping in a timely manner. Depending on where in the country you are located, you might also need to look for manufacturers that ship to your location. This might mean checking to make sure the company ships internationally.

The next time you’re looking to order compressor replacement parts, keep these traits in mind. With a compressor parts manufacturer that supplies all compressor components, has years of experience, and is known for its fast response rate, you can’t go wrong.

  • Metallic Plates

    KB Delta manufactures and stocks a complete range of metallic compressor valve plates and rings for the natural gas, refrigeration and P.E.T. industries.

  • Thermoplastic Plates

    Our specialized precision tooling and proprietary lapping process gives our customers the highest quality thermoplastic plates and rings in the industry.

  • Springs

    We manufacture our own springs and stock over 2 million springs for a variety of OEM spring styles, forms and materials.

  • Peripheral Valve Internals

    KB Delta offers one of the most complete lines of valve internals in the industry. All of our parts are manufactured to OEM Standards in performance and efficiency.

  • Complete Valve Repair Kits

    KB Delta offers a full line of valve repair kits for all the major reciprocating compressor manufacturers.

  • P.E.T. Compressor Parts

    KB Delta specializes in manufacturing compressor valve parts for high pressure air compressors used in the P.E.T. plastic bottle manufacturing industry.

Industries we serve

Natural Gas Industry

The processing and refining of Natural Gas into a marketable products, by separating gas into pipeline-quality natural gas and a stream of mixed natural gas liquids and the transportation of natural gas to through a series of reciprocating compressor stations and pipes, and from there to end users.

Blow Molding Industry

This industry manufactures blow molding machinery. Injection stretch blow molding process has two main different methods, a single-stage and two-stage process; these are the methods by which hollow plastic parts are formed.

Medical Technology Industry

The medical technology industry is an important part of the healthcare sector. It includes most medical devices which aid the prevention, diagnosis and treatment of diseases and illnesses. Established centers of this industry include the United States and Western Europe.