Skip to content

Spring Deflection: What Is It and How Is It Calculated?

When it comes to understanding springs better for your business or product needs, it’s ideal to know all about spring deflection. This includes understanding how it is calculated. Read further.

Spring Deflection: What Is It and How Is It Calculated? - KB Delta

Knowing more about spring deflection and calculating will help you identify the amount of load a spring can handle. To know the spring that will be useful for your business, you need to know the spring to purchase.

Each spring has its application and the force it can endure. When the spring is heavily forced, premature wear might occur. That is to know the amount of stress a spring can handle will make it last longer than the one we use unchecked.

What is spring deflection? This refers to the way a spring reacts or responds when a load is applied or removed. Deflection can only occur on a spring when force is applied or released. There are various types of spring, but let’s talk about these important two springs:


  • Compression springs
  • Extension springs


Compression Springs

These are springs that work by being compressed, and they release Linear force by pushing back the load or force set on it. A well-designed compression spring will regain its strength and push back to its original level even when compressed with weights.

Compression springs can be in different sizes; they might be in small or large compression springs or a conical compression spring.

The different compression springs are:


1. Concave Springs

Concave spring is a kind of compression spring in which the coils are narrower in the middle than the edge.


2. Volute Springs

It is a compression spring that has cone-shaped. They make the coils of the volute spring with a curved sheet of metal, so it has no wire coil.


3. Straight Coil Springs

These are types of compression springs where every coil is endowed with the same diameter. It is useful and mostly utilized by manufacturers.


4. Conical Springs

Just like its name, conical springs are springs that are in the form of cones. The ends are not equal; one end is small while the other end is long, so the diameter is not equal. In some conical springs, the coils are interchangeable because of the change in diameter.


5. Convex Springs

Convex springs are mostly used by manufacturers to stabilize and resist surges when the spring decompresses. They design convex springs with small coils on their ends and large diameters in the middle. Its form makes it accurate, and well fit with each other whenever the spring gets compressed.

Compression springs are applicable in many industries, and they are integral, useful in almost every product. These products include electronics, medical devices, appliances, and many other varieties of applications.

How to calculate compression springs:

You can’t start calculating without having your tools; get your measurements kits on the ground and get set to calculate.


  • The Spring Wire

When you want to start your measurements, begin with measuring the compression springs wire’s diameter. And for accuracy, it would be nice to measure it into three decimal places.


  • The Outside of the Coil

The next thing to be measured is the outside of the coils, and it depends on the coils. But you may measure the larger part first.


  • Measure the Compression Springs Length

To achieve this, you need to stretch the compression springs before taking the measurements. It would help if you took these measurements while we decompress the compression springs.


  • The Number of Coils

It is essential to count the number of coils. Count these coils to the closest 1/8th.


  • The Wind Direction

Try to observe the wind direction, although this may not be necessary. But it is useful.


  • The Springs End Type

Try to note the spring end type. The spring may come in different ways, and the end coils may be opened or not. It all depends on the compression springs.


  • Compression Spring Wire Material

Try to confirm the spring wire material type; try to know if it is magnetic or not. This will help you determine its appropriate usage.


Spring Deflection: What Is It and How Is It Calculated? - KB Delta


Extension Springs

Extension springs are springs designed with two ends to attach or hold on to another component. It has the energy to resist pulling weight or force and also maintain its energy. They also design it to stretch out its length whenever it is pulled.

They endow it with different hooks; it might be side hooks, extended hooks, etc. because of their tension, extension springs do not require any support to their length, and this makes them more durable than compression springs.

They usually use extension springs for general door kits. However, you can also apply them to other mechanical equipment. For instance, it can play vital roles in the industrial world, agricultural sector, automotive and electronics, and more fields.

The extension spring is mainly designed to absorb and store energy received from the weight placed on it. The moment the extension spring is released or relieved of its weight or force applied on it, push back the force. It readjusts itself and makes the object attached to it get back to the original state.

Extension spring is made up of different materials; these include stainless steel, music wire, phosphor bronze, etc.

And it is applicable for trampolines, farm machinery, gates, chest expander for exercise, etc.

The extension springs include custom extension springs, hook-end extension springs, stock extension springs, precision extension springs, etc.

How to calculate extension springs:

There are procedures to everything; there is a need for proper measurement to have the best extension springs. The following steps will guide you through how to calculate or measure your extension springs.


  • Tools

Before you can start working on calculating an extension spring, you need to get your measurement tools. Tools like a ruler for minor measurements or tape measure for large spring, micrometer, and dial calipers.


  • The Wire’s Diameter

The first measurement to take when calculating an extension spring is the wire’s diameter. And you need to measure this at two different angles. Through this measurement, you will calculate the average and have an actual ordering.


  • Outside Diameter

This is the spring outside diameter, and you need to have it measured. You will take these measurements from the center of the spring because of the end coils.


  • Body Length Measurement

This body length can also be called the coiled portion. It is the place of the hooks and loops. The required tools here are micrometers or calipers, although it depends on the extension spring’s size. If it is a small spring, calipers or micrometers will be useful, but you can use a ruler for larger springs.


  • Complete Length Measurement

Finally, you need to know the overall length; endeavor to measure the full length to know the length that will be over the top of the ends.



The compression springs and extension springs have their usage, and each has its advantages. The extension spring stretches its length because of external force; it also reduces its length through the structural member. However, the compression springs have to pull the components to increase their length, and for compression to occur, there must be enough gap between the two coils.

The essence of knowing what a spring deflection means and how it is being calculated is to help you know the best one for your business. And it also helps to understand how one can make use of it.


Read More:

Posted in
Skip to content